Air Barrier Systems

ExoAir® 210AT is a self-adhered permeable air barrier membrane that is comprised of a high-performance acrylic adhesive and a nonwoven facer. When installed properly as a system, ExoAir 210AT will mitigate air infiltration/exfiltration and water penetration while remaining permeable to the passage of water vapor.

Product#: exoair-210at

ExoAir® 220 Fluid-Applied Permeable Air Barrier Membrane is a monolithic, elastomeric membrane designed to be rolled or sprayed onto exterior above-grade wall assemblies to mitigate air infiltration/exfiltration and water penetration while remaining permeable to the passage of water vapor.

Product#: ab_exoair_220_02

ExoAir® 230 Fluid-Applied Synthetic Permeable Air Barrier Membrane is a monolithic, elastomeric membrane designed to be rolled or sprayed onto exterior above-grade wall assemblies to mitigate air infiltration/exfiltration and water penetration while remaining permeable to the passage of water vapor.

Product#: exoair-230

Securock® ExoAir® 430 pre-applied fluid-applied synthetic permeable air/water barrier membrane is a monolithic, elastomeric membrane that is applied in a factory setting eliminating the inconsistencies and weather impact that can occur when applied in the field. It is applied to the face of USG Securock® Brand Ultralight Glass-Mat Sheathing panels for above-grade wall assemblies to mitigate air infiltration/exfiltration and water penetration while remaining permeable to the passage of water vapor.

Product#: securock-exoair-430

ExoAir® 110AT is a 22-mil composite impermeable membrane that is comprised of 16 mils of butyl and 6 mils of HDPP facer. It can be used as the membrane, detailing accessory, as well as thru-wall flashing of an air barrier system. ExoAir 110AT when installed properly as a system will provide the requirements of an air barrier: air impermeable, continuity, structural integrity and durability.

Product#: exoair-110at

ExoAir® 120 Fluid-Applied Air and Vapor Barrier Membrane is a monolithic, elastomeric membrane designed to seal exterior above-grade wall assemblies and mitigate air infiltration/exfiltration, vapor transmission and water penetration.

Product#: exoair-120

ExoAir® 130 Fluid-Applied Synthetic Air and Vapor Barrier Membrane is a monolithic, elastomeric membrane designed to seal exterior above-grade wall assemblies and mitigate air infiltration/exfiltration, vapor transmission and water penetration. It is available in a single grade that can be roller or spray applied using the appropriate spraying equipment.

Product#: exoair-130

Proglaze® ETA is a pre-engineered silicone materials used as a transition assembly between the window or wall system and adjacent air and vapor barrier materials. The assembly is comprised of a flat single or double ribbed silicone extrusion of varying widths, which is adhered to the building façade with Spectrem 1 Silicone Sealant to ensure a durable connection and positive seal. The opposite edge of the ribbed silicone extrusion will span unsupported onto the wall and/or window system, which is adhered with Spectrem 1 Silicone Sealant. This connection will provide a long-term durable flexible connection between the two components.

Product#: proglaze-eta

Proglaze® ETA 3-D Molded Corner Connections are engineered from 40 Durometer Dense Translucent Silicone used for making connections to our ExoAir® Air Barrier Membrane systems with Spectrem® 1 Silicone Sealant. The 3-D molded corners have been designed in such a way so that they may be used to overlap one another or used in conjunction with other Proglaze ETA components to accommodate complex transitions.

Product#: proglaze-eta-3-d-molded-corners

Proglaze® ETA Connections are pre-engineered silicone materials used as a transition assembly between the window or wall system and adjacent air and vapor barrier materials. The assembly is comprised of a flat single or double ribbed silicone extrusion of varying widths, which are adhered to the building facade with Spectrem® 1 Silicone Sealant to ensure a durable connection and positive seal. The opposite end of the ribbed silicone extrusion will span unsupported onto the wall and/ or window system, which is adhered with Spectrem 1 Silicone Sealant. This connection will provide a long-term durable flexible connection between the two components.

Product#: proglaze-eta-connections

Spectrem® Simple Seal is an ultra-low modulus, preformed silicone extrusion specifically designed to have high elongation properties. Simple Seal is typically bonded with Spectrem 1 Silicone Sealant to a wide range of substrates to provide a watertight seal.

Product#: spectrem-simple-seal

ExoAir® 110 is a composite 40-mil sheet designed to be a component of an air barrier system. ExoAir 110 is 36 mils of self-adhering SBS rubberized asphalt laminated to 4 mils of white, cross-laminated, high-density polyethylene film and a siliconized release liner.

Product#: exoair-110

ExoAir® LEF is a single-component, CFC-free, all-season, high performance, gun-grade polyurethane foam that performs as a thermal barrier.

Product#: exoair-lef

ExoAir® Flex is a single-component, high performance, gun-grade polyurethane flexible foam that performs as a thermal barrier. With an industry leading movement range of +/-15% (Movement Accommodation Factor of 30%), ExoAir Flex protects against thermal expansion and contraction. ExoAir Flex is CFC-free and can be applied over a wide temperature range, making it a reliable, four-season solution.

Product#: exoair-flex-foam

Henry® Blueskin® VP160 is a self-adhered vapour permeable, water resistive air barrier consisting of an engineered film and a patented, permeable adhesive technology with split-back poly-release film. Blueskin® VP160 is fully adhered to the wall substrates in a weatherboard method without mechanical attachment.

Product#: BlueskinVP160

Henry/Bakor Blueskin TWF is a self-adhered membrane consisting of an SBS rubberized asphalt compound, which is integrally laminated to a yellow cross-laminated polyethylene film. The membrane is specifically designed for use as a thru-wall flashing.

Product#: BlueskinTWF

Blueskin® SA is a self-adhering membrane consisting of an SBS rubberized asphalt compound laminated on a blue polyethylene film. Impermeable to air, moisture vapor and water, Blueskin® SA is designed to install easily on a variety of prepared substrates.

Product#: BlueskinSA

Blueskin® WP 200 is a self-adhering composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a high-performance waterproofing barrier.

Product#: BlueskinWP200

Hi-Tac™ is a rubber-based construction adhesive and primer for self-adhesive membranes, such as Blueskin® SA, Blueskin® WP 200 or Blueskin® ROOF RF 200, Blueskin® ROOF PE200HT, and Blueskin® Weather Barrier. Hi-Tac™ is the primer of choice when these products are applied to insulated concrete forms (ICF), masonry, concrete, wood, gypsum board, DensGlass Gold®, polystyrene, and metal surfaces.

Product#: Hi-TacPrimer

Aquatac Primer is a polymer emulsion based primer for self-adhesive membranes.

Product#: AquatacPrimer